--WHAT MAKES YOU SPECIAL？

--It is SINOARC® PVD

--HOW WE MAKE PVD？

--The Chamber

The SINOARC®. PVD   process takes place in a chamber designed exclusively for SINOARC®. The chamber is comprised of four key pieces of equipment:

A group of vacuum pump creates a strictly controlled environment to ensure a flawless finish, free of imperfections.

A tank emits several types of gases critical for the durability and beauty of PVD film.

The target provides ion with much of its resistance to corrosion.

The jig holds the work pieces to guarantee that the work peaces has a uniform film coating of PVD and can withstand the rigors of every check.

Now that we’ve seen where the SINOARC®. PVD  process occurs, let’s take a look at the Target and find out why it’s so important to the finish’s durability.

--The Target

The target is made of zirconium - one of the world’s most corrosion-resistant materials. An electric arc has the target to send the zirconium ion.

The magnet is back of the target ,and steers the electric arc running around the target in order to evenly distribute the zirconium on the work peace parts.

SINOARC®. PVD FILM will not corrode, tarnish or discolor. Tested against more than 100 household cleaners, you can use almost anything to clean it. SINOARC®. PVD FILM will even withstand prolonged exposure to hard water or sea air.

From here, we’ll move on to the Process to see exactly what goes into the creation of this revolutionary anti-tarnish finish.

--The Process

The target material is heated, vaporized and travels toward the work piece parts at an extremely high speed.

The target material strikes the surface of the work piece parts and reacts with a special mixture of gases. One of the gases, nitrogen, gives PVD its rich color. Another special gas dramatically increases its resistance against corrosion, tarnish and discoloration.

The amount of each gas and the timing of their introduction to the target material is proprietary to the PVD process.

As the target material combines with the gases, it embeds into the work piece parts , creating a bond that's virtually indestructible.

Benefit:
SINOARC®. PVD FILM is abrasion-resistant and can even withstand repeated scouring with steel wool.

The entire SINOARC®. PVD FILM process takes only 45 minutes - a short time to create a finish that will last a lifetime.

Finally, the End Result. Let’s see why SINOARC®. PVD FILM is better than traditional finishes

--The End Result

Upon hitting the faucet surface at such high speed, the SINOARC®. PVD FILM molecules become so tightly packed that they absorb and/or reflect light to take on tones and colors of a room’s decor.

SINOARC®. PVD FILM molecules embed deep into the faucet’s surface, creating a bond that’s virtually indestructible.

Benefit:
SINOARC®. PVD FILM is guaranteed to resist abrasion for life. It will retain an “out-of-the-box” appearance through years of everyday use, cleaning and scouring - even in high traffic areas like the kitchen.

Now that we’ve seen how SINOARC®. PVD FILM is made, let’s go back and explore countless other reasons why you should choose SINOARC®.

Copyright(C) Beijing sinoarc PVD Tech Corp all right reserved
京ICP备05046010号